Designed for lower extremity positioning with dual height options

Designed by Richard Berger, MD

Product No's:
2750-00 [Berger Block Positioner Set]
Dimensions with Pads: 4.75' x 6.75' x 8'
(12,1 cm x 17,1 cm x 20,3 cm)

Set Includes / Available Individually:
2750-01 [Berger Block Positioner Only]
Dimensions: 4.125' x 6.125' x 8'
(10,5 cm x 15,6 cm x 20,3 cm)
2750-P [Berger Block Positioner Pad Only]
[Berger Block Positioner Brown Strap Only]
(2) Included in Set
Optional Items:
2750-S [Berger Block Positioner Brown Strap] Pkg of 10

Download Product Brochure (PDF)

TOP

Provides stable positioning of a patient during hip procedures

Designed by William Capello, MD

Two-piece board construction allows for easier use and storage. Includes: Board, Gel Pad, (4) 6' Radiolucent Pegs, (4) 9' Radiolucent Pegs, (2) Stabilizing Clamps, (2) Table Clamps. All gel pads, pegs and peg height extensions can be used with existing peg boards. Peg Extensions and Peg Pads are optional. The board is also available in a one-piece design. The pegs are radiolucent.

Product No’s:
Length: 47' • Width: 18.75'
4090 [Set with 2-Piece Board[
4095 [Set with 1-Piece Board]
Optional & Replacement Parts:
4090-PB [2-Piece Positioning Board]
4095-PB [1-Piece Positioning Board]
4090-06 [6' Radiolucent Peg]
4090-08 [9' Radiolucent Peg]
4090-SC [Stabilizing Clamp]
4090-01 [Large Gel Pad]
4090-EXT [Peg Extension]
4090-02 [Peg Gel Pad]
9120 [Table Clamp]

SEE ALSO: LARGE PATIENT PEG BOARD POSITIONER POST ASSEMBLY

Download Product Brochure (PDF)

TOP

Supports the lower extremity for prepping before hip or knee surgery

Designed by J. Cherf, MD

Useful for all lower extremity procedures and particularly helpful for supporting the leg with the patient positioned in the lateral position. By holding the foot/ankle in an externally rotated position, the knee can be locked into extension which helps eliminate the need for manual support.

The leg holder may also be used to support the limb for surgical patients in the supine position such as for knee and foot/ankle procedures.

Product No's.
2270
4150-PD3 [Set of 3 Replacement Pads]

Download Product Brochure (PDF)

TOP

Designed to help position the operative leg for femoral preparation in direct anterior approach total hip arthroplasty using a standard operating table

Designed by Benjamin M. Frye, MD

Allows one assistant to secure the leg for femoral preparation.
Attaches directly to a standard operating table.
Allows easy assessment of hip stability and leg length discrepancy.

Product No's:
4165-00 [Assembly]
Individual/Replacement Parts:

4165-01 [Leg Support]
Overall Length: 8.75' (22,2 cm)
Width: 2.5' (6,4 cm)
4165-02 [Calibrated Rod]
Dimensions: 9.625' x 7.125' x 1' (24,5 x 18,1 x 2,5 cm)
4165-P [Leg Support Pad]
Dimensions: 8.5' x 3' x 1.75' (21,6 x 7,6 x 4,4 cm)
4150-PS [Support Screw]
T-Handle Width: 1.875' (4,7 cm)
T-Handle Depth: 1.5' (3,8 cm)
9120 [Table Clamp]
Dimensions: 1.7' x 1.7' x 1.4' (4,3 x 4,3 x 3,6 cm)
US Patent No. 16/523,304

Download Product Brochure (PDF)

TOP

Especially helpful with large patients where reaching the a.s.i.s. is needed for stabilization

Designed by Paul Ramsey, MD

Designed to work in conjunction with the Capello Patient Positioner (or any other patient positioner).
The peg board positioner is available separately and is not included with this assembly set.

Product No:
4150-10P [Complete Set]
Includes:
4090-03 [Post Assembly Adapter]
4150-10B [10' Post with 2 Pads]
4150-EXT [2' Spacer with 4' Knob]
4150-EXT4 [4' Spacer with 6' Knob]

SEE ALSO: CAPELLO PATIENT POSITIONER

Download Product Brochure (PDF)

TOP

Provides stable positioning of a patient during hip surgery

Multi-adjustment arms allow the positioner to be adjusted to fit all sizes of patients. Especially helpful with large patients where reaching the a.s.i.s. is needed for stabilization.

Product No's:
4030
4150-PD2 [Replacement Pads–Pkg of 2]

Download Product Brochure (PDF)

TOP

Provides stable positioning of a patient during hip surgery

Designed by S. David Stulberg, MD

Storage Case Included

The Stulberg Hip Positioner is used for stable positioning of a patient during total hip and revision surgery. It is designed to attach directly to the operating table utilizing the existing table adapters.
The upright pads are made of semi-dense foam to help prevent pressure points and are sealed with a washable coating. The coating also helps to lessen the possibility of skin breakdown.
The pad assembly can be adjusted for additional height and width. The upright posts are modular. The complete unit is radiolucent and autoclavable except for the foam pads and the storage case.

Product No: 4150-00
Consists of: Case, one 10” post assembly with double pads, one 6” post assembly with a single pad, two 2” spacers, one 4” knob, one 6” knob, and two table attachments.

Optional & Replacement Parts:

Pads, Pad Parts, Pad Assemblies & Sets:
4150-P [Pad Plate] (Small Pad Attaches to this Plate)
4150-PA [Pad Assembly] (Pad Knob, Plate & Pad)
4150-PB [Pad Knob] (Attaches Pad Plate to Post)
4150-PD3 [Set of 3 Small Pads]
4150-PD12 [Case of 12 Small Pads]
4150-V [Set of 30 Velcro Strips] (For Pad Attachment)

Posts, Post Parts, Post Assemblies & Sets:
4150-06 [6' Post (15,2 cm)] (Post Only)
4150-06B [6” Post with Pad Assembly]
4150-06C [6” Post with Pad Assembly and Slider]
4150-06D [6” Post with Pad Assembly, Slider
& Table Attachment]
4150-08 [8' Custom Post (20,3 cm)] (Post Only)
4150-09 [9' Custom Post (22,9 cm)] (Post Only)
4150-10 [10' Post (25,4 cm)] (Post Only)
4150-10B [10” Post with Pad Assembly]
4150-10C [10” Post with Pad Assembly and Slider]
4150-10D [10” Post with Pad Assembly, Slider
& Table Attachment]
4150-12 [12' Custom Post (30,5 cm)] (Post Only)
4150-14 [14' Custom Post (35,6 cm)] (Post Only)
4150-PS [Post Screw]
4150-S [Slider] (Connects Post to Table Attachment)
4150-SS [Slider Screw]
4150-TA [Table Attachment]

Extension Parts, Extension Assemblies & Sets:
4150-C [2' Spacer (5,1 cm)]
4150-C4 [4' Spacer (10,2 cm)]
4150-EK [4' Knob (10,2 cm)]
For use with 2' Spacer
4150-EK4 [6' Extension Long Knob (15,2 cm)]
For use with two 2' Spacers or one 4' Spacer
4150-EK6 [8' Extension Long Knob (20,3 cm)]
For use with one 2' Spacer and one 4' Spacer
4150-EXT [2' Extension (5,1 cm)]
(2” Spacer with 4” Knob)
4150-EXT4 [4' Extension (10,2 cm)]
(4”Spacer with 6' Knob)
4150-EXT6 [6” Extension (15,2 cm)]
(4' and 2' Spacers with 8' Knob)

Other Parts:
9002 [Storage Case]

VIEW INSTRUCTIONAL VIDEO

Download Product Brochure (PDF)

TOP

Designed to be adjustable yet sturdy when stabilizing a large patient for hip surgery

Designed by Robert L. Thornberry, MD

The Thornberry Large Patient Hip Positioner is used for stable positioning of a large patient during total hip and revision surgery. It is designed to attach directly to the operating table utilizing existing table clamps, or the Innomed #2595 Table Clamps which are not included.

The upper arm assembly can be adjusted for height. Both arms include a push-button to allow the pad platform to swivel and lock into any of three fixed positions. The tall 18' post also includes a push-button to allow the post/arms unit to swivel and lock into any of three fixed positions.

The distance between the arms (centered) is 8.5' minimum and 17.25' maximum.

The complete unit is autoclavable except for the foam pads. The pads are made of semi-dense foam to help prevent pressure points and are sealed with a washable coating. The coating also helps to lessen the possibility of skin breakdown.

It may be necessary to place the Double Table Attachment(s) 180°—sticking out from the table—to accommodate the large patient, as shown above.

Positioner consists of:

Download Product Brochure (PDF)

TOP

Provides stable positioning of a patient during hip surgery

Designed by R.L. Wixson, MD

The Wixson Hip Positioner is used for stable positioning of a patient during total hip and revision surgery. It is designed to be placed on top of the operating table.
The base plate is rubber-backed to reduce slipping on the table. The uprights can easily be slid in and out of the multiple slots in the plate for desired positioning and locked into position with the locking bolt. The complete upright assembly is radiolucent.
The upright pads and the base plate pad are made of semi-dense foam to help prevent pressure points and are sealed with a washable coating. The coating also helps to lessen the possibility of skin breakdown.
The pad assembly can be adjusted for additional height and width. The upright posts are modular. The complete unit is radiolucent and autoclavable except for the foam pads.

Download Product Brochure (PDF)

TOP

Helps protect the chest and shoulders from slumping forward during total hip surgery

Designed by R.L. Wixson, MD and S. David Stulberg, MD

Product No. 4110

Download Product Brochure (PDF)

TOP